True TBB-24GAL-48-HC 48″ Bar Refrigerator – 2 Swinging Solid Doors, Black, 115v

The True TBB-24GAL-48-HC two-section bar refrigerator can hold 48 six-packs of 12-ounce cans or two half-barrel kegs, depending on the tapping kit. Inside, four adjustable PVC-coated wire shelves can hold bottles, cans, or a variety of other products due to their ¹/₂-inch increments. LED lights in the cabinet illuminate the interior so employees can see the contents in low lighting. For maintenance and cleaning, the refrigeration system slides out from behind the grille. Interior temperatures can be set between 33 and 38 degrees Fahrenheit, keeping products safe and fresh. Because of the high-volume airflow created by the evaporator and condenser fans, the unit does not create lots of heat or require lots of energy.

The black vinyl front and sides, along with the black aluminum back, are durable and wear resistant. Made from galvanized steel, the top of the unit can slide under a cabinet, and to help prevent rust, interior surfaces are made of stainless steel and galvanized steel. The True TBB-24GAL-48-HC back bar cooler is fully insulated with high-density polyurethane foam. This foam and the frame rail provide structural strength, so the unit is less likely to warp or sag. Permanently attached 12-inch handles help employees comfortably open and close the doors, while magnetic gaskets on the frames prevent cold air from leaking out. Door locks keep unauthorized personnel out of the cabinet after hours.

Product Details

• Can hold (48) 6-packs of 12-oz. cans or 2 half-barrel kegs
• 4 PVC-coated wire shelves are adjustable in ¹/₂-in. increments
• LED interior lighting ensures products are visible
• Epoxy-coated evaporator prevents corrosion
• Self-contained capillary tube system uses environmentally friendly R290 hydrocarbon refrigerant
• Temperature holding range: 33-38 degrees F
• Cast-iron, self-lubricating evaporator fan motors and large fan blades provide high-volume airflow to create fast pull-down time, cold holding temperatures, and quick temperature recovery
• Refrigeration system slides out for maintenance and cleaning

Cabinet Construction

• Black vinyl front and sides are laminated and wear resistant
• Black aluminum back is durable
• Galvanized steel top slides under a bar or countertop
• Stainless steel interior floor with galvanized steel walls
• Polyurethane foam is used to insulate the entire cabinet
• Black powder-coated steel frame rail gives the cabinet durability
• Laminated black vinyl exterior on the doors is resistant to wear and tear
• 12-in. recessed handle on each door is permanently attached
• Cold air is kept in the fridge with the help of magnetic gaskets on the doors
• Locks on the doors prevent unwanted access

Dimensions & Utilities

• Shelves: 17³/₄ in. W x 18 in. D
• Overall: 47⁷/₈ in. W x 24³/₄ in. D x 34¹/₄ in. H
• 2.1 A, ¹/₅ HP
• 115 V/60 Hz/1 ph, 7-ft. cord with a NEMA 5-15P plug

Back Bar Cooler, two-section, 47-7/8″W, (48) 6-packs or (2) 1/2 keg capacity, (4) wire shelves, condensing unit on left, galvanized sub top, (2) full doors with locks, LED interior lights, galvanized interior with stainless steel floor, black powder coated cold-rolled steel exterior, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1-ph, 2.1 amps, NEMA 5-15P, cULus, UL EPH Classified, Made in USA