Traulsen G11010 29 7/8″ One Section Reach In Refrigerator, (1) Right Hinge Glass Door, 115v

The Traulsen G11010 single-section refrigerator’s top-mount refrigeration system keeps it away from debris and dirt on the floor, because if these particles get sucked into the condenser, it can affect operation and efficiency. An evaporator coil meters R-450A refrigerant through a thermal expansion valve based on the temperature conditions, and that temperature is adjustable between 34 and 38 degrees Fahrenheit on the microprocessor control system. Operators can keep up with the temperature on the LED display, which shows in Fahrenheit or Celsius.

The stainless steel, galvanized steel, and anodized aluminum exterior strengthens the Traulsen G11010 one-section reach-in refrigerator. It has a glass door that increases product visibility without releasing cold air, though this construction does not hold cold air inside as well as solid doors. At 120 degrees, the door stays open for product stocking and cabinet cleaning, and it self-closes at less than 120 degrees. The unit comes with three shelves and a guard that encourages complete airflow.

Product Details

• Load-sure guard separates product from the interior walls, enabling air to flow around the cabinet
• Anodized aluminum interior and exterior sides resist corrosion
• Stainless steel exterior front and 1-piece louver assembly
• Galvanized steel exterior top, back, and bottom
• Glass door provides visibility without releasing cold air
• Lock on the right-hinged, self-closing door prevents theft
• 120-degree, stay-open feature helps staff load the unit
• LED lighting increases visibility in the cabinet
• Exterior-mounted switch controls LED lights
• 2-in.-thick, foamed-in-place polyurethane insulation
• EZ-Clean door gaskets have a lasting design
• 3 epoxy-coated steel wire shelves
• 6-in. casters lock in place for stability
• 2,240 BTU
• Part of the G series

Top-mount Refrigeration System

• Microprocessor controller has an LED display
• Temperature holding range: 34-38 degrees F
• Uses R-450A refrigerant metered by a thermostatic expansion valve
• Top mounted away from dust and dirt on the floor
• Evaporator coil sits outside the food zone
• Front-facing condenser coil

Dimensions & Utilities

• 29⁷/₈ in. W x 35⁷/₁₆ in. D x 83⁷/₁₆ in. H
• 7.4 A, 3.06 kW, ¹/₃ HP
• 115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug

Dealer’s Choice Display Refrigerator, one-section, 23.57 cu. ft., top mount self-contained refrigeration, (1) full height glass door (hinged right), (3) epoxy coated shelves (factory installed), microprocessor control with LED display, LED interior lights, stainless steel front, anodized aluminum sides & interior, 6″ high locking casters, non-flammable R-450A refrigerant, 1/3 HP, cETLus, NSF

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.