Delfield N8256-STP 56″ Recessed Frost Top w/ Built In Compressor, 115v

The Delfield N8256-STP drop-in frost top measures 55.6 inches wide by 22 inches deep to accommodate two sheet pans when placed in a long configuration from left to right. Designed to be installed in a 54.6-inch by 21.1-inch counter cutout, its display area measures 51 inches long by 18 inches deep, and its surface is recessed by 0.75 of an inch. While the top is made of one-piece, heavy-gauge stainless steel to resist corrosion and withstand heavy use, the exterior is made of galvanized steel. A push-in perimeter gasket secures it in place upon a counter top, ensuring cool air doesn’t escape.

To ensure ingredients are held at safe temperatures, the Delfield N8256-STP frost top has a self-contained refrigeration system located beneath the frost top on a heavy-gauge steel frame and uses R290 refrigerant. Refrigeration lines built into the underside of the top create a cool surface, while the high-density, closed-cell polyurethane insulates the top to prevent temperature changes. The unit can be turned on and off with the toggle switch, and it comes with a stainless steel louver that can help regulate airflow.

Product Details

• Accommodates 2 sheet pans
• Can be installed into 54.6-in. x 21.1-in. counter cutout
• 1-piece, heavy-gauge stainless steel top
• Heavy-gauge galvanized steel exterior housing
• Top is recessed 0.75 in.
• Self-contained unit
• R290 refrigerant
• High-density polyurethane foam insulation
• Push-in perimeter gasket
• On/off toggle switch
• Stainless steel louver for field installation
• 1,146-BTU heat transfer capacity

Dimensions & Utilities

• Display area: 51 in. W x 18 in. D
• Overall: 55.6 in. W x 22 in. D x 15.91 in. H
• 3.7 A, ¹/₄ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug
• 0.5-in. drain connection

Drop-In Frost Top, holds 2 sheet pans (long left to right), heavy-gauge galvanized steel exterior housing, on/off toggle switch, perimeter gasket, self-contained refrigeration, R290 refrigerant, 1/5 HP, (54.60″ x 21.10″ cutout required), cUL, UL, NSF