Beverage Air WTRCS52HC 52″ Chef Base w/ (2) Drawers – 115v

$6,675.78

  • Temperature holding range: 36-38 degrees F
  • 8.99-cu.-ft. capacity
  • Part of the Hydrocarbon series
  • Full electronic control
  • 2 self-closing drawers
  • Each drawer accommodates (2) 20-in.-L x 12-in.-W x 6-in.-D sheet pans
  • Sheet pans are sold separately
  • Drawer gasket is magnetic and features 1-piece construction
  • Storage drawers have 12-ga. stainless steel slides with Delrin rollers and can hold 275 lbs.
  • Top is made of 16-ga. insulated, reinforced stainless steel that’s fire resistant
  • Stainless steel front, sides, drawers, and grille
  • Galvanized steel back and bottom
  • Corrosion-resistant, aluminum interior liner
  • No heat shield is required
  • Raised edges prevent dripping down the back and sides of the unit
  • Nonelectric, adaptive defrost has hot gas condensate evaporation functionality
  • (4) 3-in. casters; 2 with brakes
  • Side-mounted, self-contained refrigeration
  • R-290 refrigerant
  • 1,110-BTU transfer capacity
SKU: BeverageAirWTRCS52HC Category:

Description

Beverage Air WTRCS52HC Description

The Beverage Air WTRCS52HC worktop chef’s stand refrigerator can accommodate two full-sized sheet pans in each of its two drawers, providing users with temperature-controlled storage within close reach of the prep area. This unit’s top is made of reinforced, 16-gauge stainless steel, insulated and resistant to fire damage. Underneath the unit, four casters enable smooth movement; two of the casters have brakes to ensure stability during use.

The self-contained refrigeration system of the Beverage Air WTRCS52HC chef’s base refrigerator maintains an internal temperature from 36 to 38 degrees Fahrenheit, preserving the freshness of stored food items. Both self-closing drawers are constructed with 12-gauge stainless steel slides and rollers that can support 275 pounds, ensuring long-lasting performance. This unit’s top is surrounded by a full marine edge that contains liquids and prevents messy dripping from unexpected spills.

Product Details

  • Temperature holding range: 36-38 degrees F
  • 8.99-cu.-ft. capacity
  • Part of the Hydrocarbon series
  • Full electronic control
  • 2 self-closing drawers
  • Each drawer accommodates (2) 20-in.-L x 12-in.-W x 6-in.-D sheet pans
  • Sheet pans are sold separately
  • Drawer gasket is magnetic and features 1-piece construction
  • Storage drawers have 12-ga. stainless steel slides with Delrin rollers and can hold 275 lbs.
  • Top is made of 16-ga. insulated, reinforced stainless steel that’s fire resistant
  • Stainless steel front, sides, drawers, and grille
  • Galvanized steel back and bottom
  • Corrosion-resistant, aluminum interior liner
  • No heat shield is required
  • Raised edges prevent dripping down the back and sides of the unit
  • Nonelectric, adaptive defrost has hot gas condensate evaporation functionality
  • (4) 3-in. casters; 2 with brakes
  • Side-mounted, self-contained refrigeration
  • R-290 refrigerant
  • 1,110-BTU transfer capacity

Dimensions & Utilities

  • 52 in. W x 343/4 in. D x 243/8 in. H
  • 1.7 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15P plug

Worktop Cook Stand Refrigerator, one-section, 52″W, 8.99 cu. ft., (2) drawers, top drawer holds (2) 12″ x 20″ x 6″ pans & bottom drawer holds (2) 12″ x 20″ x 6″ pans (NOT included), fire-proof stainless steel top, front & sides (no heat shield required), full marine drip guard, aluminum interior, side-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents: