Beverage Air SPED72HC-24M-4 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED72HC-24M-4 prep table can hold a total of 24 sixth-size, 6-inch-deep pans in the top cutouts. Sixth-size pans can also be stored in the four drawers that are sold separately. Its stainless steel and galvanized steel exterior construction withstands commercial use and minor damage. The removable hoods and lid assemblies, constructed of stainless steel, provides protection against contamination. The aluminum lining inside the cabinet is corrosion resistant and easy to clean. A polyethylene cutting board can be used as an area to plate final dishes and prepare toppings to be stored in the cabinet.

Products are evenly cooled with the forced air system, ensuring product is kept in the safe temperature zone. Cold temperatures are maintained by R290 hydrocarbon refrigerant. The rear-mounted design allows the cabinet to be installed next to walls or equipment without blocking air intake.

The Beverage Air SPED72HC-24M-4 prep table has a door compartment with two epoxy-coated shelves that hold blocks of cheese, meat, and produce. The door is removable and is field reversible to accommodate your needs. Cold air is kept inside the cabinet with the self-closing design on the door. It stays open past 120 degrees to make loading and unloading product simple. Its four pull-out drawers have stainless steel frames for strength and locking slides to prevent drawers being pulled out of the unit.

Product Details

• Stainless steel exterior with galvanized steel bottom and back withstands heavy use
• Detachable hoods and lids protect product from contaminants and keep cold air over the pans
• 24 sixth-size, 4-in.-D pans are held in the two countertop cutouts
• Removable polyethylene cutting board is easy to clean and can be used to prepare stored toppings
• Aluminum lining protects the interior from corrosion
• 6-in. casters provide mobility and 2 have brakes to lock it in place
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 72 in. W x 38³/₈ in. D x 49 in. H

4 Pull-Out Drawers and 1 Door Compartments

• Door section has two epoxy-coated steel wire shelves that resist corrosion
• Stay-open design on the door keeps it from closing past 120 degrees to assist with loading and unloading product
• Door is reversible in the field
• Snap-in gaskets reduce the risk of cold air leaks
• Self-closing design retains cold air
• Door can be removed for cleaning and replacing
• Heavy-duty stainless steel frames have telescoping slides for support
• Locking slides prevent drawers being unintentionally removed from cabinet
• Aluminum handles are strong and reliable

Rear-Mount Refrigeration System

• Cold air is evenly distributed with the forced air system
• R290 hydrocarbon refrigerant keeps temperatures cool
• Refrigeration system is rear mounted, allowing other equipment to sit flush with the unit
• Epoxy-coated evaporator resists corrosion

Elite Series Mega Top Refrigerated Counter, three-section, 72″ W, 14.6 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), (1) door, stainless steel top with opening for (24) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.