Beverage Air SPED72HC-12M-4 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED72HC-12M-4 prep table holds ingredients for salads and sandwiches in the top opening that accommodates 12 sixth-size, 4-inch-deep pans. To keep the product at safe temperatures, forced air from the evaporator moves under the pans. A stainless steel hood and lid assembly keep contaminants out of the pans while retaining cold air. Prepping and finishing products is simple since there is a 10-inch cutting board, which can be removed to simplify cleanup.

The Beverage Air SPED72HC-12M-4 prep table’s refrigeration system uses hydrocarbon refrigerant for cooling; this type of refrigerant saves energy compared to traditional refrigerants. There are four drawers and one door compartment to provide additional storage space. The drawers have stainless steel frames and locking slides to keep them from being accidentally removed from the cabinet. Its door compartment comes with two epoxy-coated steel wire shelves to hold items. The door is self-closing and has a stay-open feature past 120-degrees for loading and unloading.

Product Details

• 12 sixth-size, 4-in.-deep pans fit in top cutout (pans are included)
• Forced air from evaporator evenly cools the bottom of the pans to keep ingredients at a safe temperature
• Stainless steel hood and lid assembly keep cold air inside the cutout
• Conveniently prep product on the removable 10-in. cutting board
• Self-contained refrigeration system is rear mounted for protection from floor debris
• R290 hydrocarbon refrigerant keeps the unit running cold
• Evaporator coil is epoxy coated for strength against corrosion
• Interior has a heavy-duty aluminum lining
• Stainless steel top, sides, front, door, and drawers withstand heavy use
• Galvanized steel back and bottom add strength for commercial applications
• 6-in. casters provide mobility for cleaning underneath the unit
• 2 casters have brakes to keep the unit from moving
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall dimensions: 72 in. W x 38³/₈ in. D x 49 in. H

Door Compartment

• 2 wire shelves are epoxy coated for durability and corrosion resistance
• Door stays open past 120 degrees for loading and unloading the compartment
• Self-closing door design adds convenience while keeping cold air inside the cabinet
• Snap-in gasket enables the door to tightly shut to prevent air leaks
• Field-reversible design accommodates various kitchen layouts

Pull-out Drawers

• Drawers hold pans measuring 6 in. deep (pans not included)
• Stainless steel frames are damage resistant and supported by telescoping slides
• Slides stop the drawers from being completely removed with their locking design
• Aluminum handles are heavy duty and painted

Elite Series Mega Top Refrigerated Counter, three-section, 72″ W, 14.6 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), (1) door, stainless steel top with opening for (12) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.