Beverage Air SPED72HC-12C-6 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

There are 12 sixth-size, 4-inch-deep pans in the top compartment of the Beverage Air SPED72HC-12C-6 prep table. These pans are cooled by forced air below the pans. R290 hydrocarbon refrigerant is used by the refrigeration system to produce cold temperatures, and this system can be accessed at the rear for servicing. The exterior is made of stainless steel and galvanized steel to hold up against dents, scratches, and other minor damage. An aluminum interior lining provides corrosion resistance and strength for commercial use.

The Beverage Air SPED72HC-12C-6 prep table has six pull-out drawers in the front that hold 6-inch-deep pans. Telescoping slides are included for supporting the stainless steel drawer frames. Locks on these slides are designed to prevent the drawers from being accidentally pulled out of the cabinet. A 17-inch-deep cutting board spans the front of the unit, so staff can conveniently prep ingredients or finish salads and sandwiches. Users can move the unit with the 6-inch casters, two of which have brakes to keep the unit still when needed.

Product Details

• 12 sixth-size, 4-in.-deep pans are included for the top opening
• Forced air from the evaporator is evenly dispersed under the pans for consistent cooling
• Stainless steel hood and lid assembly keep cold air inside the pan compartment
• 17-in. cutting board creates a convenient prep space that is easy to clean
• Refrigeration system is serviceable from the rear
• R290 hydrocarbon refrigerant maintains the cold temperatures
• Epoxy-coated evaporator coil resists corrosion
• Aluminum interior is corrosion resistant
• Durable exterior built of stainless steel with a galvanized steel bottom and back
• 2 of the 6-in. casters lock in place with brakes
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall dimensions: 72 in. W x 38³/₈ in. D x 45¹/₈ in. H

Pull-out Drawers

• 6-in.-deep pans fit in the drawers (pans not included)
• Stainless steel drawer frames have telescoping slides for support
• Telescoping slides lock to keep the drawers from being accidentally pulled out
• Handles are made of aluminum and painted for a professional look

Elite Series Sandwich Top Refrigerated Counter, three-section, 72″W, 14.6 cu. ft., (6) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (12) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 17″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.