Beverage Air SPED60HC-12C-2 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED60HC-12C-2 prep table uses R290 hydrocarbon refrigerant to maintain cool temperatures. Its evaporator recirculates and forces air throughout the cabinet for even distribution of cold temperatures. The stainless and galvanized steel exterior is resistant to minor damage. Corrosion is resisted in the cabinet thanks to its aluminum construction. With its 6-inch casters, the unit is easy to move and can be locked in place with two locking casters.

The countertop has a cutout where 12 sixth-size pans sit. Extra storage can be found in the two drawers and door section, which features two steel wire shelves coated in corrosion-resistant epoxy. The door itself can be left open past 120 degrees and has a self-closing design to fight temperatures loss. Snap-in gaskets prevent cold air leaks on the Beverage Air SPED60HC-12C-2 prep table.

Product Details

• Exterior is constructed of heavy-duty stainless and galvanized steel
• Corrosion is resisted by the aluminum interior
• Hood and lid assembly is made of stainless steel for minor damage resistance
• Countertop cutout holds 12 sixth-size polycarbonate pans
• Cutting board is made of polyethylene and can be removed for cleanup
• 6-in. casters make it easy to move the cabinet
• 2 braking casters allow the cabinet to lock in place
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with NEMA 5-15P plug
• Interior Dimensions: 56 in. W x 15³/₈ in. D x 23 in. H
• Overall Dimensions: 60 in. W x 38⁷/₈ in. D x 45 in. H

Rear-Mount Refrigeration System

• Eco-friendly R290 hydrocarbon refrigerant produces cool temperatures
• Evaporator forces recirculated air under pans to evenly chill products
• Epoxy coating on evaporator coil is corrosion resistant
• Service can be conducted from the rear

Door and Drawer Compartments

• Door is self-closing to prevent temperature loss
• Door stays open past 120 degrees
• Door can be reversed in the field
• Snap-in gasket prevents cold air leaks
• Door can be removed to facilitate cleaning
• 2 wire shelves are made of corrosion-resistant epoxy-coated steel
• Drawer frames are made of stainless steel and supported by telescoping slides
• Locking mechanism prevents the drawers from being pulled out of cabinet
• Pans up to 6 in. deep fit in drawers

Elite Series Sandwich Top Refrigerated Counter, two-section, 60″W, 12.2 cu. ft., (2) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), (1) door, stainless steel top with openings for (12) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 17″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.