Beverage Air SPED60HC-10-4 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED60HC-10-4 prep table has an exterior mostly made of stainless steel, making it easy to clean and allowing the cabinet to hold up against minor damage. It features four pull-out drawers with sturdy aluminum handles and stainless steel frames supported by telescoping slides. Food can be conveniently stored in the 10 included polycarbonate pans in the table top compartment. The pans measure 4 inches deep, and the drawers accept pans up to 6 inches deep. A heavy-duty stainless steel hood protects the compartment from temperature loss and contaminants in the air.

The Beverage Air SPED60HC-10-4 prep table has an evaporator that cools with environmentally-friendly R290 hydrocarbon refrigerant. The evaporator coil is coated in epoxy to provide corrosion resistance. Air is forced and recirculated under pans, ensuring product stays in the safe temperature zone. Workspace is offered by a removable polyethylene cutting board, allowing staff to prep toppings that will go in the compartment. The four 6-inch casters provide mobility, and two of the four casters can be locked to keep the cabinet stationary.

Product Details

• Exterior is mostly made of stainless steel for durability
• Galvanized steel back and bottom are strong
• Interior is constructed of corrosion-resistant aluminum
• Countertop compartment accommodates 10 polycarbonate pans
• Hood and lid protect items in the countertop compartment from contaminants and temperature loss
• Cutting board is made of polypropylene and can be removed to facilitate cleaning
• (4) 6-in. casters make it easy to move the cabinet
• 2 braking casters allow cabinet to stay in place
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with NEMA 5-15P plug
• Interior Dimensions: 56 in. W x 15³/₈ in. D x 23 in. H
• Overall Dimensions: 60 in. W x 31⁷/₈ in. D x 45 in. H

Rear-Mount Refrigeration System

• Forces and circulates air to evenly disperse cold temperatures
• Corrosion-resistant epoxy coating protects evaporator coil
• Uses R290 hydrocarbon refrigerant for cooling the interior
• Rear-mounted design allows system to breathe from the back

4 Pull-Out Drawers

• Drawer frames are supported by telescoping slides
• Slides lock to prevent drawers from being pulled out of the cabinet
• Strong, painted aluminum handles withstand constant use
• Accepts 6-in.-deep pans

Elite Series Sandwich Top Refrigerated Counter, two-section, 60″W, 12.2 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (10) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.