Beverage Air SPED48HC-10C-4 48″ Refrigerated Sandwich Prep Table w/ (4) Drawers & 17″ Cutting Board, 115v

The Beverage Air SPED48HC-10C-4 prep table uses forced air from the evaporator to keep product in the top opening cold. It comes with 10 sixth-size, 4-inch-deep pans in its top compartment. Additional 6-inch-deep pans can be stored in the four drawers. The drawers have stainless steel frames with telescoping slides that lock to keep the drawers from being accidentally removed from the cabinet.

The unit’s four 6-inch casters enable mobility and two of the casters can be locked to make the cabinet stationary. R290 hydrocarbon refrigerant produces cold temperatures in the unit. The Beverage Air SPED48HC-10C-4 prep table’s refrigeration system is rear-mounted, allowing the prep table to be installed beside walls and other equipment.

Product Details

• Top compartment includes 10 sixth-size, 4-in. pans
• Forced air is circulated under the pans to ensure the product stays at safe temperatures
• Stainless steel hood and insulated lid assembly prevent product contamination
• Conveniently prep ingredients on the 17-in. cutting board
• Top, grille, sides, and front are constructed of easy-to-clean, heavy-duty stainless steel
• Galvanized steel bottom and back withstand use in commercial establishments
• Aluminum interior lining resists corrosion and minor damage
• Rear-mounted refrigeration system is isolated from most spills and floor debris
• R290 hydrocarbon refrigerant is more energy efficient than traditional refrigerants
• Evaporator coil has corrosion-resistant epoxy coating for long-lasting strength
• Mounted on 6-in. casters (2 of the casters have brakes)
• 1,140 BTU
• 115 V/60 Hz/1 ph, 2 A, ¹/₆ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 48 in. W x 38³/₈ in. D x 45¹/₄ in. H

Pull-out Drawers

• Drawers can hold 6-in. D pans
• Stainless steel drawer frames are supported by telescoping slides
• Slides have a locking mechanism that keeps the drawers inside the cabinet
• Aluminum handles are painted for a professional appearancek

Elite Series Sandwich Top Refrigerated Counter, two-section, 48″W, 9.8 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (10) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 17″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/6 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.