Beverage Air SPED48HC-10-4 48″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED60HC-08C-2 prep table has a heavy-duty, easy-to-clean stainless steel exterior with a galvanized steel bottom and back. Its top compartment holds 10 sixth-size, 4-inch-deep pans. Forced air is circulated below the pans, cooling the product efficiently and evenly. Ingredients from the pans can be cut and prepared on the 10-inch-deep polyethylene cutting board, which is removable to facilitate cleaning. Since a hood and lid assembly sits over the top compartment, the food is protected from contamination.

The four pull-out drawers can be used for additional storage. They have stainless steel frames and telescoping, locking slides which prevent the drawers from being accidently removed from the cabinet. The Beverage Air SPED60HC-08C-2 prep table uses R290 hydrocarbon refrigerant to maintain cold temperatures.

Product Details

• Top compartment holds ingredients in 10 sixth-size, 4-in.-D pans
• Stainless steel hood and lid assembly retains cold air while keeping contaminants out
• Includes a removable 10-in.-D cutting board for convenient prepping and plating
• Interior is lined with corrosion-resistant aluminum for durability
• Stainless and galvanized steel exterior provides strength and resists corrosion
• 2 of the 6 in. casters have locks for stability
• 1,140 BTU
• 115 V/60 Hz/1 ph, 2 A, ¹/₆ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 48 in. W x 32 in. D x 45¹/₄ in. H

Pull-out Drawers

• Drawers accommodate 6-in.-D pans
• Stainless steel drawer frames are supported by telescoping slides
• Locking mechanisms in the slides prevent the drawers from being completely pulled out of cabinet
• Handles are made of heavy-duty painted aluminum

Rear-mount Refrigeration System

• System is serviceable from the rear
• Evaporator recirculates forced air under the pan compartment for efficient cooling
• Epoxy-coated evaporator coil resists corrosion
• System runs on environmentally friendly R290 hydrocarbon refrigerant

Elite Series Sandwich Top Refrigerated Counter, two-section, 48″W, 9.8 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (10) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/6 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.