Beverage Air SPE60HC-08 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

Forced air from the evaporator flows under the pan section in this Beverage Air SPE60HC-08 Elite Series prep table, keeping ingredients above freezing and below 41 degrees Fahrenheit. Sixth-size, 4-inch-deep pans are included; they are covered by insulated lid and hood assemblies that retain cold air. On the front of the unit, a 10-inch-deep cutting board runs along the length, so employees can prep ingredients and make salads and sandwiches.

The refrigerated base section in this Beverage Air SPE60HC-08 prep table maintains temperatures from 36 to 38 degrees Fahrenheit using R290 hydrocarbon refrigerant. It provides additional storage space on four epoxy-coated wire shelves and has a corrosion-resistant aluminum liner. Field-reversible doors enable the operator to choose which side the hinge is on, and they are removable for cleaning. Since the doors have a self-closing design, they keep cold air in the cabinet. Employees can easily load product into the base with the 120-degree stay-open door feature.

Product Details

• 8 sixth-size, 4-in.-deep pans
• Removable, insulated lid and hood assemblies retain cold air and prevent contamination
• Removable 10-in.-deep cutting board runs the length of the unit for prep space
• 17.1-cu.-ft. interior space
• 4 corrosion-resistant, epoxy-coated wire shelves
• Corrosion-resistant aluminum interior liner in the base section
• Self-closing door design conveniently retains cold air
• 120-degree stay-open door feature
• Snap-in door gaskets keep cold air in the cabinet
• Field-reversible, removable doors
• Fully electronic control
• Part of the Elite series
• 2 of the (4) 6-in. casters have brakes
• 1,549 BTU

Rear-mount Refrigeration System

• Base temperature range: 36-38 degrees F
• Forced air moves under the pans, keeping ingredients above freezing and below 41 degrees F
• R290 hydrocarbon refrigerant
• Evaporator coil is epoxy coated and resistant to corrosion
• Can be accessed from the rear for maintenance

Dimensions and Utilities

• Door opening: 22⁵/₈ in. W x 21⁵/₈ in. H
• Interior: 56 in. W x 23³/₈ in. D x 23 in. H
• Overall: 60 in. W x 32 in. D x 45 in. H
• 5.4 A, ¹/₃ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug