Beverage Air SPE48HC-10 48″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

$3,878.93

  • 10 sixth-size, 4-in.-deep pans
  • Removable stainless steel hood and lid cover pans for safety and cold air retention
  • Removable 10-in.-deep cutting board provides a prep space for salads and sandwiches
  • 13.9-cu.-ft. interior space
  • 4 wire shelves are coated in corrosion-resistant epoxy
  • Aluminum liner in the base is corrosion resistant and strong
  • Removable doors can be reversed in the field
  • Doors are self-closing to prevent cold air from leaking
  • 120-degree stay-open door feature for loading
  • Snap-in door gaskets
  • Full electronic control
  • Part of the Elite series
  • 2 of the (4) 6-in. casters have locks
  • 1,140 BTU
SKU: BeverageAirSPE48HC-10 Category:

Description

Beverage Air SPE48HC-10

The Beverage Air SPE48HC-10 Elite Series prep table holds ten sixth-size, 4-inch-deep pans in the top rail. These pans are included, and ingredients held in them can be prepped on the 10-inch-deep cutting board. Forced air from the evaporator circulates under the pans to keep ingredients above freezing and below 41 degrees Fahrenheit. A hood and lid keep cold air around the pans while preventing contaminants from reaching them.

Wire shelves in the refrigerated base hold additional ingredients; this design enables air circulation to keep products properly cool between 36 and 38 degrees Fahrenheit. Since the shelves are coated in epoxy, they are resistant to corrosion. Self-closing cabinet doors keep cold air inside the Beverage Air SPE48HC-10 prep table, while the stay-open feature past 120 degrees simplifies cabinet cleaning and product loading. These doors are reversible in the field and removable to facilitate cleanup.

Product Details

  • 10 sixth-size, 4-in.-deep pans
  • Removable stainless steel hood and lid cover pans for safety and cold air retention
  • Removable 10-in.-deep cutting board provides a prep space for salads and sandwiches
  • 13.9-cu.-ft. interior space
  • 4 wire shelves are coated in corrosion-resistant epoxy
  • Aluminum liner in the base is corrosion resistant and strong
  • Removable doors can be reversed in the field
  • Doors are self-closing to prevent cold air from leaking
  • 120-degree stay-open door feature for loading
  • Snap-in door gaskets
  • Full electronic control
  • Part of the Elite series
  • 2 of the (4) 6-in. casters have locks
  • 1,140 BTU

Rear-mounted Refrigeration System

  • Base temperature range: 36-38 degrees F
  • Forced air from the evaporator moves under the pans to keep ingredients under 41 degrees F and above freezing
  • R290 hydrocarbon refrigerant
  • Epoxy coating on the evaporator coil is corrosion resistant
  • Can be serviced from the rear

Dimensions and Utilities

  • Door opening: 195/8 in. W x 215/8 in. H
  • Interior: 44 in. W x 231/2 in. D x 23 in. H
  • Overall: 48 in. W x 32 in. D x 451/4 in. H
  • 2 A, 1/6 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Elite Series Sandwich Top Refrigerated Counter, two-section, 48″ W, 9.8 cu. ft., (2) doors, stainless steel top with opening for (10) 1/6 size pans, 10″ cutting board & available counter space, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), R290 Hydrocarbon refrigerant, 1/6 HP, UL, cUL, UL EPH, NSF, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Reviews

There are no reviews yet.

Be the first to review “Beverage Air SPE48HC-10 48″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v”

Your email address will not be published. Required fields are marked *