Beverage Air DD72HC-1-S 72″ Draft Beer System w/ (3) Keg Capacity – (2) Column, Stainless, 115v

$5,461.97

  • Temperature range: 36-38 degrees F
  • Full electronic control
  • Brushed stainless finish
  • 19.95-cu.-ft. capacity
  • Can fit 3 full kegs
  • 4 stainless steel dispensing taps are mounted on 2 insulated columns
  • 3 solid cabinet doors have locks
  • Antimicrobial beverage tubes carry liquid from kegs to nozzles
  • Stainless and galvanized steel construction enhance strength
  • Magnetic door gaskets retain cold air
  • Self-closing doors
  • Heavy-duty stainless steel drip tray
  • Floor and door sill are reinforced for extra strength
  • Drain tube enables connection to floor drain
  • Side-mounted, self-contained compressor
  • Automatic defrost
  • Evaporator coil coated with epoxy resists moisture damage
  • R290 hydrocarbon refrigerant minimizes environmental impact
  • Heat transfer capacity: 1,942 BTU

Plant Based Pros is an Authorized Retailer of Beverage Air products.
Items purchased from Plant Based Pros are:

  • Brand new and in original packaging.
  • Covered by the full manufacturer warranty.
  • Qualified for manufacturer service and support.
  • Questions? Call (800) 522-0517
SKU: BeverageAirDD72HC-1-S Category:

Description

Beverage Air DD72HC-1-S

This Beverage Air DD72HC-1-S draft beer cooler is a good choice for locations needing to serve a high volume of cold, fresh beverages quickly. Supplied by durable antimicrobial tubing that resists flavor-altering bacteria, it has four stainless steel taps mounted on two stainless steel columns. Since the cabinet is made of stainless steel with a reinforced floor, it can withstand heavy use while resisting sagging, denting, or warping.

Providing hundreds of frosty cold beverages without needing a refill, the Beverage Air DD72HC-1-S beer dispensing system can store three kegs inside the cabinet. In between uses, operators can lock the solid doors to preventing content theft. To streamline installation, the compressor is included within the unit and doesn’t require any additional coolant lines or remote compressing to operate.

Product Details

  • Temperature range: 36-38 degrees F
  • Full electronic control
  • Brushed stainless finish
  • 19.95-cu.-ft. capacity
  • Can fit 3 full kegs
  • 4 stainless steel dispensing taps are mounted on 2 insulated columns
  • 3 solid cabinet doors have locks
  • Antimicrobial beverage tubes carry liquid from kegs to nozzles
  • Stainless and galvanized steel construction enhance strength
  • Magnetic door gaskets retain cold air
  • Self-closing doors
  • Heavy-duty stainless steel drip tray
  • Floor and door sill are reinforced for extra strength
  • Drain tube enables connection to floor drain
  • Side-mounted, self-contained compressor
  • Automatic defrost
  • Evaporator coil coated with epoxy resists moisture damage
  • R290 hydrocarbon refrigerant minimizes environmental impact
  • Heat transfer capacity: 1,942 BTU

Dimensions & Utilities

  • Interior: 601/4 in. W x 183/4 in. D x 277/8 in. H
  • Overall: 72 in. W x 243/4 in. D x 511/4 in. H
  • 3.1 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug

Draft Beer Cooler, 72″ W, 24-3/8″ D, 19.95 cu. ft., (3) doors, (3) keg capacity, door locks, (2) dual angle faucet columns, stainless steel exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air DD72HC-1-S 72″ Draft Beer System w/ (3) Keg Capacity – (2) Column, Stainless, 115v”

Your email address will not be published. Required fields are marked *