Beverage Air DD78HC-1-B-12T 79″ Draft Beer System w/ (4) Keg Capacity & (1) Column, Black, 115v

This Beverage Air DD78HC-1-B-12T draft beer cooler is perfect for serving a high volume of draft beverages within a short time period. With 12 taps and the capacity to store four full kegs, this unit can supply a large amount of beverages while shortening wait times. So it can support the weight of full kegs without bowing or separating, it’s made of sturdy steel with a reinforced.

Ensuring each drink retains the appropriate flavor, the Beverage Air DD78HC-1-B-12T beer dispensing system is built with naturally antimicrobial lines connecting the kegs to the dispensing taps. Operation of the unit is simplified, because it has fully electronic controls and a self-contained condenser for streamlined maintenance. Three locking doors on the front of the unit keep supplies concealed and safe from interference.

Product Details

• Temperature range: 36-38 degrees F
• Full electronic control
• Black
• 33.59-cu.-ft. capacity
• Cabinet holds 4 full kegs
• 12 stainless steel dispensing taps are mounted on 1 insulated column
• 3 cabinet doors can be locked to secure contents
• Antimicrobial beverage tubing is lined with silver
• Made of galvanized and stainless steel
• Magnetic door gaskets
• Self-closing doors
• Heavy-duty stainless steel drip tray
• Reinforced floor and door sill
• Drain tube enables connection to floor drain
• Self-contained compressor mounted on the side
• Automatic defrost
• Evaporator coil is epoxy coated
• R290 hydrocarbon refrigerant for minimal environmental impact
• Heat transfer capacity: 2,392 BTU

Dimensions & Utilities

• Interior: 66¹/₄ in. W x 23¹/₈ in. D x 27³/₈ in. H
• Overall: 79 in. W x 29 in. D x 52⁵/₈ in. H
• 5.5 A, ¹/₃ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug

Draft Beer Cooler, 79″ W, 28-3/16″ D, 33.59 cu. ft., (3) doors, (4) keg capacity, door locks, (12) tap tower, black exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.