Beverage Air SPE60HC-10 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPE60HC-10 Elite Series prep table has a refrigerated storage base with four epoxy-coated wire shelves. They enable complete airflow and resist corrosion for durability. The temperature in this section ranges from 36 to 38 degrees Fahrenheit. Self-closing doors provide cabinet access and retain cold air. When users are loading ingredients into the base, the doors stay open past 120 degrees for convenience. These doors are removable to facilitate cleaning, and their field-reversible design increases installation flexibility.

The Beverage Air SPE60HC-10 prep table comes with 10 sixth-size pans for its rail section. This compartment is protected from contaminants by an insulated hood and lid assembly, which also retains cold air. The rail section is cooled by forced air from the evaporator, keeping the temperature above freezing and below 41 degrees Fahrenheit. A 10-inch-deep, full-length cutting board provides a place for users to prep ingredients and make dishes.

Product Details

• 10 sixth-size, 4-in.-deep pans
• Insulated lid and hood assembly keeps cold air around the pans
• Removable 10-in.-deep cutting board on the front
• 17.1-cu.-ft. interior space
• 4 epoxy-coated wire shelves
• Aluminum interior liner provides corrosion resistance
• 2 self-closing doors help prevent cold air from escaping
• Door is designed to stay open past 120 degrees for loading and cleaning
• Snap-in door gaskets prevent cold air from leaking
• Removable, field-reversible doors
• Part of the Elite series
• Full electronic control
• 2 of the (4) 6-in. casters have brakes for stability
• 1,549 BTU

Rear-mount Refrigeration System

• Base temperature range: 36-38 degrees F
• Forced air from the evaporator is recirculated under the pans to keep ingredients below 41 degrees F and above freezing
• Uses R290 hydrocarbon refrigerant
• Evaporator coil has a corrosion-resistant epoxy coating
• Can be serviced from the rear

Dimensions and Utilities

• Door opening: 22⁵/₈ in. W x 21⁵/₈ in. H
• Interior: 56 in. W x 23³/₈ in. D x 23 in. H
• Overall: 60 in. W x 32 in. D x 45 in. H
• 5.4 A, ¹/₃ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Elite Series Sandwich Top Refrigerated Counter, two-section, 60″ W, 12.2 cu. ft., (2) doors, stainless steel top with opening for (10) 1/6 pans, 10″ cutting board & available counter space, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.