Beverage Air SPED72HC-24M-2 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED72HC-24M-2 prep table has a damage-resistant exterior with stainless steel sides, top, front, and grille, and the bottom and back are made of galvanized steel. It has an aluminum interior liner that resists corrosion. There are two openings in the top that hold 24 sixth-size, 4-inch-deep pans. There are two pull-out drawers in the cabinet base that also hold sixth-size pans that are 6 inches deep. Toppings can be prepared on the polyethylene cutting board, which is removable for cleaning.

The Beverage Air SPED72HC-24M-2 prep table features two door compartments in the front that each have an epoxy-coated steel wire shelf to hold stored product. These doors can be reversed in the field to accommodate your workflow and are removable for cleaning and replacing. They have a self-closing design to prevent cold air from being released. The doors stay open past 120 degrees, allowing you to load and unload product easily.

Product Details

• Stainless steel top, sides, front, and grille and galvanized steel bottom and back are heavy duty
• Interior is lined with aluminum for resistance to corrosion
• 24 sixth-size, 4-in.-D pans are stored in the top opening
• 10-in. D polyethylene cutting board is great for plating main dishes and preparing toppings
• Stainless steel hoods guard food from contaminants and retain cold air
• (4) 6-in. casters provide mobility
• 2 braking casters keep the cabinet in place
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 72 in. W x 38³/₈ in. D x 49 in. H

2 Pull-Out Drawers and 2 Door Compartments

• 2 drawers accept 6 in. D pans (Sold separately)
• Stainless steel frames provide durability
• Slides lock to keep drawers from being pulled out of the unit
• Aluminum handles withstand constant use
• Epoxy-coated steel wire shelves hold product
• Door can be reversed on-site to accommodate various workflows
• Self-close design on the doors prevent cold air leaks
• Snap-in gaskets reduce the risk of cold air leaks
• 120-degree stay-open feature ensures the doors stay open for loading and unloading
• Removable doors facilitate cleaning

Rear-Mount Refrigeration System

• Rear-mounted system allows the unit to sit next to walls or other equipment without affecting air flow
• Forced air system evenly chills products by evenly distributed cold air
• Evaporator is epoxy coated for corrosion resistance
• Environmentally-friendly R290 hydrocarbon refrigerant maintains cool temperatures

Elite Series Mega Top Refrigerated Counter, three-section, 72″ W, 14.6 cu. ft., (2) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), (2) doors, stainless steel top with opening for (24) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.