Beverage Air SPED72HC-18M-2 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED72HC-18M-2 prep table holds 18 sixth-size pans measuring 4 inches deep in its top opening. Forced air from the evaporator evenly cools the pans from below, so the ingredients stored inside are kept at safe temperatures. Hood and lid assembly made of stainless steel function to keep contaminants out and retain cold air. Its 10-inch-deep polyethylene cutting board provides a place for prepping ingredients, and it can be removed to assist cleaning.

The Beverage Air SPED72HC-18M-2 prep table has two drawers to hold 6-inch-deep pans. The drawers have strong stainless steel frames. Its frames are supported by telescoping slides that lock to keep the drawers from being pulled out of place by accident. The door compartments each have two rugged steel wire shelves with corrosion-resistant epoxy coating. The door is self-closing and can be propped open at a 120-degree angle for product loading and unloading. The refrigeration system uses R290 hydrocarbon refrigerant, which is safer for the environment than traditional refrigerants. The rear-mounted design protects the refrigeration system from damage from floor debris. Since the system breathes through the back, the unit is suited for operation with equipment or walls to its right and left.

Product Details

• Includes 18 sixth-size, 4-in.-deep pans for the top compartment
• Even pan cooling is provided by forced air under the top compartment
• Removable 10-in.-deep cutting board provides a place for prepping and plating
• Protective hood and lid assembly are made of stainless steel for simple cleanup
• Stainless steel exterior with a galvanized steel back and bottom for durability in commercial establishments
• R290 hydrocarbon refrigerant is used to create the cold temperatures
• Self-contained refrigeration system is mounted in the rear to enable placement next to walls and equipment
• Corrosion-resistant aluminum interior lining adds durability
• Evaporator coil resists corrosion with an epoxy coating
• 6-in. casters provide mobility for servicing and cleaning
• Unit can be stationary with the 2 braking casters
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with a NEMA 5-15P plug
• Overall dimensions: 72 in. W x 38³/₈ in. D x 49 in. H

2 Door Compartments

• 4 shelves are made of steel wire and epoxy coated
• 120-degree, stay-open feature enables convenient product stocking
• Self-closing door design keeps cold air inside the unit
• Doors close tightly with snap-in gaskets
• Doors are reversible in the field to fit into different layouts

2 Pull-out Drawers

• 6-in.-deep pans accepted in compartments (pans not included)
• Stainless steel frames are long-lasting and have telescoping slides for support
• Locking slides prevent the drawers from being inadvertently removed
• Heavy-duty aluminum handles withstand commercial use

Elite Series Mega Top Refrigerated Counter, three-section, 72″ W, 14.6 cu. ft., (2) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), (2) doors, stainless steel top with opening for (18) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.