Beverage Air SPED60HC-12M-4 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Beverage Air SPED60HC-12M-4 prep table is mostly constructed of stainless steel for strength and corrosion resistance. The interior is made of aluminum to prevent corrosion. To store toppings and keep them cool, there is a cutout in the top of the unit that holds 12 sixth-size polycarbonate pans. A polyethylene cutting board runs along the front to act as a place to slide dishes down to add toppings.

Four drawers in the front hold sixth-size pans up to 6 inches deep. Their stainless steel frames are supported by slides with a telescoping design. The slides have a locking mechanism to keep the drawers from accidentally being pulled out of the cabinet. They have durable handles made of painted aluminum.

The Beverage Air SPED60HC-12M-4 prep table has a rear-mounted refrigerated system that can be easily accessed through the back for maintenance. Eco-friendly R290 hydrocarbon refrigerant is used to provide cool temperatures. The evaporator uses forced air under pans to evenly circulate cold temperatures. An epoxy coating on the evaporator coil resists corrosion.

Product Details

• Sides, top, front, and grille are made of stainless steel to withstand minor damage
• Galvanized steel exterior back and bottom withstand heavy use
• Interior is constructed of aluminum to resist corrosion
• Stainless steel insulated lid and hood protect toppings from warm air and contaminants
• 12 polycarbonate pans sit in the countertop cutout
• Toppings can be prepared on the polyethylene cutting board
• Drawers have stainless steel frames supported by telescoping slides
• Slides can be locked to prevent drawers from being pulled out
• Sturdy handles are made of painted aluminum
• Moves easily with 6-in. casters
• 2 braking casters keep cabinet in place
• 1,549 BTU
• 115 V/60 Hz/1 ph, 3 A, ¹/₄ HP, 8-ft. cord with NEMA 5-15P plug
• Interior Dimensions: 56 in. W x 15³/₈ in. D x 23 in. H
• Overall Dimensions: 60 in. W x 38³/₈ in. D x 49 in. H

Rear-Mount Refrigeration System

• Recirculated air from evaporator is evenly distributed in the cabinet
• Corrosion-resistant epoxy coating on evaporator coil
• Rear-mounted system allows the unit to be serviced easily
• R290 hydrocarbon refrigerant keeps temperatures cool

Elite Series Mega Top Refrigerated Counter, two-section, 60″ W, 12.2 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (12) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 10″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.