Kolpak KFX7-0610-CR Indoor Walk In Refrigerator w/ Remote Compressor, 9′ 8″L x 5′ 10″W x 7′ 6″H

Made of galvalume inside and out, the Kolpak KFX7-0610-CR Kold-Front walk-in cooler is durable and rust resistant. Its door is reinforced by a kickplate on each side, and the ceiling and wall panels are strengthened by foamed-in-place polyurethane insulation. Cam lock connectors ensure correct alignment between panels for stability, while gaskets seal up the spaces between them. Instead of floor panels, this unit features a vinyl screed. Although this screed does not provide as much temperature retention, it helps keep moisture inside the unit and comes at a lower price. To prevent theft, this unit has a lockable, self-closing door. Contents are illuminated by LED lighting so they are visible.

This Kolpak KFX7-0610-CR indoor walk-in refrigerator comes with a remote condenser, which does not need to be installed near the cooler. Instead, this condensing unit can be placed in a different room, or even outside of the building. Not only does this setup free up space around the cooler, but it also reduces the amount of heat and noise in the prepping area. The refrigeration system uses a thermal expansion valve to maintain a set temperature of 35 degrees Fahrenheit, and if the temperature changes, the valve quickly responds and returns to the set temperature.

Product Details

• Part of the Kold-Front series
• 320-cu.-ft. interior space
• Interior LED lighting illuminates the enclosed space
• Self-closing door is reinforced by kickplates on both sides
• Key on lock reduces risk of theft
• Magnetic gasket creates a strong door seal
• Panel gaskets fill in cracks around panels
• Cam locks ensure panels stay connected
• Wall and ceiling panels contain dense polyurethane insulation for cooling efficiency
• Galvalume exterior and interior are durable and corrosion resistant
• Vinyl screed helps keep cold air inside unit
• Embossed finish helps disguise scratches and water marks
• Safety control regulates pressure levels

Remote Refrigeration System

• 2-in.-tall dial thermometer for temperature monitoring
• Operating temperature: 35 degrees F
• Expansion valve provides quick temperature recovery
• Defroster runs on a timer
• Remote location lowers noise level in the kitchen

Dimensions & Utilities

• Cooler nominal: 6 ft. W x 10 ft. D x 7 ft. H
• Cooler actual: 5 ft. 10 in. W x 9 ft. 8 in. D x 7 ft. 6¹/₄ in. H
• Evaporator: 0.8 A, 115 V/60 Hz/1 ph
• Condenser: 5.7 A, 208-230 V/60 Hz/1 ph

Walk-In Cooler, Indoor Kold-Front, 7′-6.25″ H, 5′-10″ W, 9′-8″ L, floorless, medium temp (+35F) with pre-charged indoor/outdoor remote unit, 26 gauge embossed galvalume interior & exterior, 4″ vinyl/foam screeds, 2″ dial thermometer, NSF, cUL, UL