Delfield F2987CP 87 1/4″ Chef Base w/ (6) Drawers – 115v

The Delfield F2987CP refrigerated chef base accommodates (10) 12-inch by 20-inch by 4-inch hotel pans in its six drawers. These stainless steel drawers have Delrin track rollers that slide smoothly without grease. Even if the unit is installed on uneven floors, the drawers stay shut because the tracks tightly hug the gaskets-these gaskets can snap in and out of place and be removed for cleaning.

This Delfield F2987CP low-profile chef base maintains internal temperatures between 36 and 40 degrees Fahrenheit, displayed on the dial thermometer which is enclosed to protect against water damage. Other components-including the condenser, condensate evaporator, and electronic controls-are in the right-side machine compartment for service access. Mounted on six-inch casters, the unit can be moved as needed for accessible component service.

Product Details

• Stainless steel top is sturdy and corrosion resistant
• Marine edge around the top keeps leaks and spills off the floor
• Fully welded top corners are smooth to simplify cleaning
• 6-in. casters provide mobility
• Can be mounted to the wall with the included bracket
• 2,508-BTU heat transfer capacity

Refrigerated Base

• 6-drawer system accommodates (10) 12-in. x 20-in. x 4-in. hotel pans (not included)
• Drawers are made of heavy-duty stainless steel
• Smooth-glide Delrin track rollers
• Drawers stay shut on uneven floors since the tracks secure to the gaskets
• Recessed handles
• Gaskets are removable with their snap-out design
• Polyurethane insulation holds cold air in the cabinet
• Interior has a stainless steel bottom and back, and ABS plastic sides

Refrigeration System

• Temperature holding range: 36-40 degrees F
• Cools using R290 hydrocarbon refrigerant
• Moves cold air through the cabinet with mullion blower coils
• Machine compartment houses the condenser, condensate evaporator, and electronic control
• Enclosed dial thermometer is protected against water damage

Dimensions & Utilities

• Top: 85.5 in. W x 29.19 in. D
• Overall: 87.25 in. W x 31.94 in. D x 24 in. H
• 4.8 A, 1.45 kW, ¹/₄ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Refrigerated Low-Profile Equipment Stand, 87-1/4″W x 31-47/50″D x 24″H, three-section, (6) drawers (pans not included), marine edge stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, 4″ casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.