Beverage Air SPE60HC-16C 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

$4,664.37

  • Includes 16 sixth-size, 4-in.-deep pans
  • Removable, insulated lid and hood assemblies ensure cold air stays around pans
  • Removable 17-in.-deep cutting board
  • 17.1-cu.-ft. interior space in the refrigerated base
  • 4 epoxy-coated wire shelves
  • Aluminum cabinet liner is heavy duty and corrosion resistant
  • 2 field-reversible doors
  • Self-closing door feature conveniently shuts the doors after opening
  • 120-degree stay-open doors for loading
  • Snap-in gaskets seal the doors to prevent cold air leaks
  • Full electronic control
  • Part of the Elite series
  • (4) 6-in. casters, 2 have brakes
  • 1,549 BTU

Plant Based Pros is an Authorized Retailer of Beverage Air products.
Items purchased from Plant Based Pros are:

  • Brand new and in original packaging.
  • Covered by the full manufacturer warranty.
  • Qualified for manufacturer service and support.
  • Questions? Call (800) 522-0517
SKU: BeverageAirSPE60HC-16C Category:

Description

Beverage Air SPE60HC-16C

The Beverage Air SPE60HC-16C Elite Series prep table comes with 16 sixth-size, 4-inch pans. Product from the pans is cooled by forced air from the evaporator and can be prepped on the 17-inch-deep cutting board. In the refrigerated base, four epoxy-coated shelves hold additional product, and the liner is made of corrosion-resistant aluminum. Users can easily access the product through the removable doors, which have a self-closing design for cold air retention. Their 120-degree stay-open design provides convenience when users load product into the base section. This Beverage Air SPE60HC-16C prep table has four 6-inch casters, two of which have brakes to stabilize the unit.

Product Details

  • Includes 16 sixth-size, 4-in.-deep pans
  • Removable, insulated lid and hood assemblies ensure cold air stays around pans
  • Removable 17-in.-deep cutting board
  • 17.1-cu.-ft. interior space in the refrigerated base
  • 4 epoxy-coated wire shelves
  • Aluminum cabinet liner is heavy duty and corrosion resistant
  • 2 field-reversible doors
  • Self-closing door feature conveniently shuts the doors after opening
  • 120-degree stay-open doors for loading
  • Snap-in gaskets seal the doors to prevent cold air leaks
  • Full electronic control
  • Part of the Elite series
  • (4) 6-in. casters, 2 have brakes
  • 1,549 BTU

Rear-mount Refrigeration System

  • Cabinet base temperature range: 36-38 degrees F
  • Forced air recirculates under pans to cool between freezing and 41 degrees F
  • Evaporator coil has a corrosion-resistant epoxy coating
  • Can be serviced from the rear
  • Uses R290 hydrocarbon refrigerant

Dimensions and Utilities

  • Door opening: 225/8 in. W x 215/8 in. H
  • Interior: 56 in. W x 233/8 in. D x 23 in. H
  • Overall: 60 in. W x 383/8 in. D x 45 in. H
  • 5.4 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Elite Series Sandwich Top Refrigerated Counter, two-section, 60″ W, 12.2 cu. ft., (2) doors, stainless steel top with opening for (16) 1/6 size pans, 17″ cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air SPE60HC-16C 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v”

Your email address will not be published. Required fields are marked *