Description
Beverage Air DD50HC-1-S
Supplying hundreds of 12-ounce beers between refills, the Beverage Air DD50HC-1-S draft beer dispensing system holds two full kegs. Made of stainless steel with a reinforced floor, the cabinet can survive intensive use without rusting or denting. Stainless steel dispensing taps mount to a 3-inch dispensing column also constructed of strong stainless steel. The tap handles enable the user to rapidly fill glasses.
The Beverage Air DD50HC-1-S kegerator beer dispenser utilizes R290 hydrocarbon, a refrigerant that has less environmental impact versus other refrigerant options. With a built-in 1/4 horsepower compressor, the unit must only be plugged into power it for use. Keeping beverages at an ideal service temperature, inside space is maintained between 36 and 38 degrees Fahrenheit.
Product Details
- Temperature range: 36-38 degrees F
- Full electronic control
- Brushed stainless steel finish
- 17.86-cu.-ft. capacity
- Holds 2 standard size kegs
- 2 dispensing taps are stainless-steel
- 1 insulated stainless steel dispensing column
- 2 high-quality doors with locking mechanisms
- Anti-microbial dispenser tubing with silver lining
- Large-capacity galvanized steel interior has an exterior made from stainless steel
- Door gaskets with magnets for tight seals
- Self-closing doors contain refrigerated air for reduced power usage
- Stainless steel drip trays
- Heavy-duty floor and door sills support full keg weight
- Floor drain connector
- Built-in refrigeration system
- Automatic defrost
- Corrosion-resistant evaporator coils with epoxy coating
- R290 hydrocarbon refrigerant
- Heat transfer capacity: 1,702 BTU
Dimensions & Utilities
- Interior: 373/4 in. W x 231/8 in. D x 273/8 in. H
- Overall: 501/2 in. W x 29 in. D x 521/2 in. H
- 2.5 A, 1/4 HP
- 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug
Draft Beer Cooler, 50-1/2″ W, 29″ D, 17.86 cu. ft., (2) doors, (2) keg capacity, door locks, (1) dual faucet column, stainless steel front, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA, 115v/60/1ph
Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
Reviews
There are no reviews yet.