Carter-Hoffmann CW4E Gravity Feed Chip Warmer w/ 44 gallon Capacity – Stainless, 120v

The Carter-Hoffmann CW4 nacho chip warmer features a top and bottom door to allow you easily implement first-in-first-out protocols, resulting in serving the freshest chips possible. Crumbs are caught at the bottom with a stainless steel pan that easily slides out for cleaning. The heating elements that distribute heat with a fan motor that blows air through the rear duct and up the bottom grates. To keep heat inside the warmer and ensure energy efficiency, there is 1-inch fiberglass insulation in the top, sides, and bottom. This unit is pre-set from the factory at 175 degrees Fahrenheit but can be adjusted up to 190 degrees Fahrenheit. The Carter-Hoffmann CW4 nacho chip warmer holds up to 44 gallons of chips to meet your high-volume demands.

Product Details

• 44-gal. capacity nacho chip warmer
• Stainless steel construction is fully welded for durability and ease of cleaning
• 1-in.-thick fiberglass insulation ensures heat retention
• Completely welded with the outer cabinet welded to the liner
• On/off switch with an indicator light alerts the user of the power status
• 12 in. x 20 in. x 2¹/₂ in. standard bottom crumb pan is made from stainless steel and slides out for cleaning
• Crumb pan slides out for easy emptying and cleaning
• Grates and duct are removable for simple cleaning
• Product is constantly rotated with the first-in, first out gravity feed to ensure freshness
• Pre-set temperature at 175 degrees F is adjustable up to 190 degrees F with tools via access hole on rear of unit
• 20-min. preheat to 160 degrees F
• Internal mechanical thermostat
• 4-in. adjustable legs ensure unit can always sit level

Heating System

• Top-mounted heating is a lift-off forced-air system with incoloy-sheathed heating elements
• Heating system is at the top of the warmer for quick heating and even distribution
• Heating system fan motor
• Air is forced through the rear duct and up through the chip grates

Stainless Steel Doors

• Bottom and product loading doors have full-width stainless steel handles
• Features a top-loading door and a bottom door for easy first-in-first-out use
• Built-in and continuous rolled butt type hinges comes with a removable stainless steel full-length pin

Dimensions & Utilities

• 30¹/₈ in. W x 28 in. D x 45¹/₂ in. H
• 1530 W, 12.6 A
• 120 V/60 Hz/1 ph, 6 ft. cord with a NEMA 5-15P plug

Bulk Chip Warmer, forced air heating system, inconel sheathed heating element, first-in first-out, gravity feed, top-loading, bottom hinged service door, stainless steel construction, approx. 44 gallons, 4″ legs, 120/60/1-ph, 1530w, 12.8 amps, NEMA 5-15P, 6ft cord, cULus, UL EPH