Citrocasa 8000 XB Advance Citrus Juicer

Description

The ideal juicing solution when you have to squeeze larger quantities of juice in advance. The juice is squeezed into the juice container with a capacity of approx. 5 liters (1.3 gal.)

The unique Cross Holder fastens 5 fixation points with 1 single screw. The juicer can be assembled and disassembled in a fraction of the time of any other juicer.

Citrocasa enables you to clean each and every part of the machine that comes in contact with the juice in the dishwasher at 95°C. Therefore absolutely no bacteria or germs remain on the juicer.

The acoustic signal sounds, and the machine stops automatically when the peel container is full. This prevents any ”Peel-Jam” of the juicer. This feature is individually programmable for big and small peel containers.

Citrocasa offers the opportunity to equip its machines with different pressing kits ( = pressing elements + peel ejectors + knife + fruit feeding tube) for small, medium and large citrus fruits (50–90 mm).

The ATS (Automatic-Transport-System) and MTS (Manual-Transport-System) keep the sieve clean of pips and pulp without removing it.

Thanks to our SCS Up & Down Cutting System, the juice produced by the 8000 is always completely pure. By cutting the fruit precisely, the SCS system avoids tearing the peel and thereby contaminating the juice with bitter substances. With 100% success. The end product is simply pure fruit goodness

Countertop Installation Kit

With the countertop kit you can integrate your juicer into your counter. For this, the counter has to be cut to allow the peels to fall into a waste bucket placed underneath.

Stainless Steel Pedestal

Ideal for tabletop machines. The pedestal raises the machine, allowing you to place a container below the tap.

Stainless Steel Cabinet

The stainless steel cabinet turns your citrocasa 8000 into the perfect solution when you need mobility and want to leverage your juicer’s pressing capacities to the fullest.

Safety is our First Priority

The Two-Zone-Technology is built up of the Engine Zone and the Food-Zone. The complete distinction of these two machine components and the fact that the complete Food Zone can be removed and cleaned thoroughly guarantee absolute hygienic and operational safety

Engine Zone
The component that remains after the whole Food-Zone is detached from the machine.

Food Zone
The whole Food-Zone can be removed from the machine and therefore cleaned thorough and according to existing food-standards all over the world. This guarantees absolute safety of the machine in terms of [ engine Zone ] hygiene because no bacteria or germs stay behind.

Perfect for your Supermarket

Right next to your other fresh products – that’s where our Citrocasa 8000 will feel at home. With pressing capacities of 40, 50 or even up to 60 oranges per minute, your customer will not have to wait in line for a perfectly fresh pressed orange juice anymore. One bottle will be filled in only a few seconds. With the additional pressing kits you will be able to individually adjust the machine to the size of fruits (from 50–90 mm) you want to press in your store. Thanks to the Cross Holder and Double Cover, you will now minimize the working hours needed by your staff for cleaning the juicer. Moreover, the machine is able to communicate (through acoustic signal and automatic stop) when the peel bucket needs to be emptied due to the integrated intelligent stop. All in all this is a perfect solution for you and your customer.

Documents

• Product Spec Sheet